Software

Displaying 1 - 10 of 40

Design software leads way to NB-IoT standard

SystemVue 2017 is making a significant contribution to the narrowband internet of things (NB-IoT) standard says Keysight Technologies. The simulation platform for system design and verification enables users to combine existing baseband, RF, and channel models together for evaluation of the entire system.
14th July 2017

Software package enhances atomic force microscope

Software package enhances atomic force microscope
Several powerful new capabilities have been announced by Keysight Technologies for the ultrafast-scanning 9500 atomic force microscope.. These new capabilities include quantitative mapping of nanomechanical properties as well as electrochemistry applications and scanning electrochemical microscopy (SECM) techniques. The Keysight 9500 used in both the scientific and industrial markets offers scan rates up to 2sec/frame and comprehensive environmental control.
25th July 2016

All-in-one software evaluates 5G candidate waveforms

All-in-one software evaluates 5G candidate waveforms
Signal Optimizer, an all-in-one software package for calibration, signal creation and signal analysis of 5G candidate waveforms has been launched by Keysight Technologies. By simplifying calibration and the critical design tasks related to 5G signal creation and analysis, the software enables R&D engineers to focus more time on being first-to-market with their own designs.
11th July 2016


Phased-array beamforming software module targets 5G systems

Phased-array beamforming software module targets 5G systems
The W1720EP Phased Array Beamforming Kit is a new add-on software simulation personality for the SystemVue 2016.08 design environment from Keysight Technologies. The software enables researchers and system architects working on platforms using beamforming algorithms for 5G, satellite, NewSpace, radar and EW applications, to reduce interference and power consumption, while increasing physical range.
17th May 2016

Enhanced voice services Codec added to network emulator software

Enhanced voice services Codec added to network emulator software
The new 3GPP Enhanced Voice Services (EVS) codec is now supported with Keysight Technologies’ E6966B IMS-SIP network emulator software. In addition, Keysight also has enhanced its UXM wireless test set with more IMS/VoLTE controls in its LTE/LTE-A test application software. This includes front panel user interface configuration of 1) traffic flow template (TFT); 2) dedicated bearer setup; and 3) end-to-end VoLTE testing with two UEs connected to a single UXM. 
12th May 2016

Transmitter testing software for USB 3.1 Type-CTM designs

Transmitter testing software for USB 3.1 Type-CTM designs
The U2743B USB 3.1 transmitter performance validation and compliance test software from Keysight Technologies offers comprehensive transmitter (TX) test support for the USB 3.1 Type-C specification. The test software allows authorised test centres to test USB 3.1 Gen2 SuperSpeed Plus 10 Gbps devices with Type-C implementations and gives in-house test and performance validation engineers the tools to ensure devices comply with the USB 3.1 Gen2 Type-C specification.
11th May 2016

Software automates CAUI-4 testing

Comprehensive compliance application software for testing electrical characteristics of 100G four-lane attachment unit interface (CAUI-4) networking applications has been introduced by Keysight Technologies. The software supports the IEEE 802.3bm standard, which accommodates optical networking advances and enables higher density applications.
10th May 2016

Multichannel mmW test solution speeds new technology development

Multichannel mmW test solution speeds new technology development
An E-band Signal Analysis Reference Solution to provide low-cost millimeter wave analysis capability for applications in the 60-90 GHz range has been released by Keysight Technologies. The reference solution is based around the 10-bit ADC Infiniium S-Series oscilloscopes to provide 2.5GHz of high-fidelity, millimetre wave frequency analysis bandwidth.
17th April 2016

Software updates add to oscilloscope capabilities

Software updates add to oscilloscope capabilities
Two software updates for its real-time oscilloscope products have been announced by Keysight Technologies. The software updates are currently available in the Infiniium oscilloscope firmware version 5.60. The N8827A PAM-4 analysis software update adds bit error ratio (BER) capabilities for 4-level pulse amplitude modulation (PAM-4) based signals.
6th April 2016

Software suite smooths semiconductor modelling path

Integrated Circuits Characterisation and Analysis Program (IC-CAP) 2016, Model Builder Program (MBP) 2016, and Model Quality Assurance (MQA) 2016 have been added to Keysight Technologies’ modelling and characterisation software suite. The software release provides designers characterising and modelling semiconductor devices with further advances in efficiency.
24th February 2016


Software documents


View & download Keysight product literature, application notes, specifications & brochures.

Literature

View & download Keysight technical support documentation, demos, manuals & selection/configuration guides.

Support

EPE 2017 ECCE Europe
11th September 2017
Poland Warsaw
DSEI 2017
12th September 2017
United Kingdom ExCeL, London
RWM 2017
12th September 2017
United Kingdom NEC, Birmingham
Productronica India 2017
14th September 2017
India Pragati Maidan, New Delhi
Industry of Things World 2017
18th September 2017
Germany Berlin Congress Center